DSi Opening Guide 2
DSi Opening Guide Page 1 of 2
DSi Opening Guide Page 2 of 2
DSi Opening Guide pdf download
We carry out a full range of
DSi Repairs and DSi Parts and all other console repairs
If you get stuck just call us and speak to a Tech we do these all day long so we can help you.
11.As shown on the picture, remove the PCB from the console's lower part of
LED panel cover and take out all the parts.
12.Remove those rubber tabs and screws for moving apart the upper console's
bottom part from
the shell.
13.remove these 2 parts.
14.Follow the direction of arrow press down this part.
15.Follow the direction of arrow 1 to push up the console's lower part of LED
panel cover, and slowly
pull out the shell (follow the direction of arrow 2).
16.Push the ring from the console's lower part of LED panel cover to the
console's upper part of LED panel cover
17.Put the flat cable to the notch (arrow indicates) then slowly pull out the
cable from the notch (Picture C), now two parts is separate (Picture D) .
18.Follow the arrow direction to slip the Angle adjuster apart.
19.Roll the flat wire and move away the ring.
20.As shown on the picture, remove all the component.
21.roll up the flat cable and remove it from the shell.
22.two parts are separated
We do not take responsibility for damage to you or your console using this guide, This guide does not show every single stage but an outline.
DSi Opening Guide Page 1 of 2
DSi Opening Guide Page 2 of 2
DSi Opening Guide pdf download
We carry out a full range of
DSi Repairs and DSi Parts and all other console repairs
If you get stuck just call us and speak to a Tech we do these all day long so we can help you. |
