This step by step tutorial will show you exactly how to fit the XCM 360 Hard Drive Shells that allow you to customize the colour of your Xbox hard drive. Installation is a pretty simple process and the only screwdriver you need is included with the hard drives.
Step by Step Instructions
Remove the Microsoft hologram sticker (this will void the warranty) and unscrew the four screws indicated, using the included screwdriver. Keep the screws safe as you'll need them later on.
Disassemble the top of the original hard drive shell. Then, take the bottom hard drive shell off, as indicated by the arrow in the picture.
Remove the actual Xbox 360 hard drive from the original shell.
Lay out the new XCM hard drive shell components.
Insert the Hard Drive into the bottom part of the XCM shell by pressing down where the arrow shows.
Piece together the hard drive onto the bottom part of the XCM shell (as shown in pics A and C) by following the arrows in picture B.
Remove the black button and spring from the original hard drive shell.
Insert the black button & spring onto the XCM hard drive shell, as indicated in the picture below. Now secure the XCM shell button on top of it.
Place the XCM HD shell top piece onto the top of the XCM hard drive bottom shell.
Where the arrows indicate on pics A and B, press down at both ends of the hard drive shell to lock it tightly shut.
Screw in the four screws you kept from the beginning to secure the revamped hard drive shell. Enjoy your new look hard drive!